Installation Procedure

WARNING: This page is about a different car, the 2015 GMC Savana 3500, 2015 GMC Savana 2500, 2015 Chevrolet Express 3500, and 2015 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: BCM And Bracket

Courtesy of GENERAL MOTORS COMPANY

Install the BCM (1) into the bracket.
Ensure the BCM (1) is engaged in the bracket, under the retaining tabs (2).

Fig 2: Electrical Connectors To Body Control Module

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors (2) to the BCM (1).

Fig 3: Right Side Knee Bolster Trim Panel

Courtesy of GENERAL MOTORS COMPANY

Install the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement .
If you replaced the BCM, program the module. Refer to Body Control Module Programming and Setup .
Refer to Control Module References for programming and setup information.