LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions >> Repair Instructions >> Engine Oil Pressure Sensor Replacement (L5Q) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Engine Oil Pressure Sensor Connector
    GM4035063Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the engine oil pressure sensor (2) to the engine and tighten to 35 N.m (26 lb ft).
  2. Connect the engine oil pressure sensor connector (1).
    3. Fig 2: Transmission Mount Bracket Bolt
    GM4035060Courtesy of GENERAL MOTORS COMPANY
  3. Install the transmission mount bracket bolt (1) and transmission mount bracket (2) and tighten to 22 N.m (16 lb ft).
  4. If equipped with manual transmission, install the engine control module. Refer to Engine Control Module Replacement .
scientia non olet · About LEMON Manuals