LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2016 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement - Water Outlet >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Engine Coolant Temperature Sensor, Electrical Connector, Retainer And Seal
    GM4091507Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW seal (1).
  2. Install the engine coolant temperature sensor (2).
  3. Install Engine Coolant Temperature Sensor Retainer (4).
  4. Connect the engine coolant temperature sensor electrical connector (3).
    5. Fig 2: Heater Outlet Hose And Clamp
    GM4091334Courtesy of GENERAL MOTORS COMPANY
  5. Connect Heater Outlet Hose (1)
  6. Tighten Heater Outlet Hose Clamp (2)
  7. Install Radiator Inlet Hose @ Water Outlet. Refer to Radiator Inlet Hose Replacement
  8. Install Heater Outlet Hose Vapor Vent Hose. Refer to Heater Outlet Hose Vapor Vent Hose Replacement
  9. Fill the cooling system. Refer to Cooling System Draining and Filling
scientia non olet · About LEMON Manuals