LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1983 >> E Class 2.2 D >> Repair and Diagnosis >> Engine Performance >> System >> Carburetor - HOLLEY 5220 2-Bbl >> Adjustment >> Float Level
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Float Level

  1. Remove air horn and gasket. Turn air horn upside down. Allow weight of float to press down against float needle valve. See Fig 1 .
    Fig 1: Float Level Adjustment Bend tang to adjust.
    G456
  2. Measure float level specified clearance between top of float and air horn gasket surface. Clearance can be checked using a specified drill or pin gauge.
  3. Make sure float tang still rests on float needle when clearance is checked. To adjust, bend tang that contacts float needle.
NOTE: DO NOT  apply pressure to float needle while checking or changing adjustment.
scientia non olet · About LEMON Manuals