Rebuild Specifications
Crankshaft Specifications| End Play | 0.0475 - 0.2725 mm (0.0019 - 0.0108 in.) |
| End Play (Max Allowable) | 0.43 mm (0.017 in.) |
| Diameter | 63.49 - 63.51 mm (2.4997 - 2.5004 in.) |
| Bearing Clearance | 0.035 - 0.053 mm (0.0014 - 0.0021 in.) |
| Bearing Clearance (Max Allowable) | 0.087 mm (0.0034 in.) |
| Out-of-Round (Max Allowable) | 0.015 mm (0.0006 in.) |
| Taper (Max Allowable) | 0.015 mm (0.0006 in.) |