LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1999 >> Sebring LXi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing - Coupe >> Ignition System >> Ignition Coil >> Ignition Power Transistor (2.5L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Power Transistor (2.5L)

  1. Disconnect distributor connectors. Using jumper wires and a 1.5 volt battery, connect positive side of battery to distributor connector terminal No. 6. Connect negative side of battery to terminal No. 5. See Figure .
  2. Using an analog ohmmeter, check for continuity between terminals No. 5 and 12. See Figure . Continuity should exist when battery is connected. Continuity should not exist when battery is disconnected. If continuity is not as specified, replace ignition power transistor.
scientia non olet · About LEMON Manuals