LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> 300M Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Removal & Installation >> Transmission Range Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transmission Range Sensor: Installation

  1. Install the TRS to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
  2. Install the TRS/manual shaft retaining screw and torque to 45 INCH Lbs. (5 N.m). See Figure .
  3. Install the manual shaft seal. See Figure .
  4. Install valve body to transaxle.
scientia non olet · About LEMON Manuals