Liftgate Light Bar: Removal

NOTE: The liftgate does not have a outside mechanical release. For any service procedures that require disconnecting battery, open liftgate, if necessary before disconnecting battery.

Release liftgate latch and open liftgate.
Open hood, disconnect and isolate the battery negative cable.
Remove liftgate inner trim panel (Refer to TRIM PANEL ).
Disconnect the liftgate light bar electrical connector.
Remove the four liftgate light bar retaining screws (Fig 1 ) and (Fig 2 ).

Fig 1: Identifying Liftgate Light Bar
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Removing Liftgate Light Bar
Courtesy of DAIMLERCHRYSLER CORP.
Using a trim stick C-4755 or equivalent, gently pry out wiring grommet to liftgate light bar.
Remove liftgate light bar from vehicle.