LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Battery System) >> Battery Tray >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Tray: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery, (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - REMOVAL) .
    Fig 1: Removing/Installing Power Distribution Center
    GC0015626Courtesy of DAIMLERCHRYSLER CORP.
  2. Using a small flat bladed tool, gently release the two mounting tabs that secure the Power Distribution Center (PDC) to the battery tray. Position the PDC aside.
    Fig 2: Removing/Installing Battery Tray
    GC0015627Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the battery tray mounting fasteners and remove the battery tray from the vehicle.
scientia non olet · About LEMON Manuals