LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2010 >> 300 SRT-8 >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Exhaust Gas Recirculation >> TRANSDUCER, EGR Back Pressure >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

TRANSDUCER, EGR Back Pressure: Installation: Installation

  1. Install the EGR back pressure sensor.
  2. Connect the engine wiring harness electrical connector.
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals