LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2010 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair >> Speed Control Cable - Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Speed Control Cable - Installation






INSTALLATION










1. Install the cable.
2. Install the retaining clip holding cable to servo.










3. Install the vacuum line to the speed control servo nipple.
4. Connect and Lock the electrical connector to the speed control servo.





5. Install the speed control servo to the mounting bracket.
6. Install the 2 nuts to the speed control servo studs and tighten to 7 Nm (60 in. lbs.).





7. Install speed control cable to throttle cable bracket.
8. Install the speed control cable to the throttle body lever.





9. Install the throttle control shield.





10. Connect the negative battery cable.

scientia non olet · About LEMON Manuals