LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Restraints System (Service Information)) >> Module, Occupant Restraint Controller >> Installation >> Jumper Harness
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Jumper Harness

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing ORC Jumper Harness
GC0122056Courtesy of CHRYSLER GROUP, LLC
  1. Connect the ORC jumper harness (2) to the body harness (3).
  2. Connect the ORC jumper harness connector (4) to the ORC (1).
  3. Install the center console. Refer to HOUSING, SHIFTER, INSTALLATION .
  4. Do not reconnect the negative cable to the battery at this time. The Supplemental Restraint System (SRS) Verification Test procedure should be performed following service of any SRS component.

    Refer to STANDARD PROCEDURE .

scientia non olet · About LEMON Manuals