LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Restraints System (Service Information)) >> Module, Occupant Restraint Controller >> Removal >> Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Occupant Restraint Controller: Removal: Module

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing ORC
GC0122055Courtesy of CHRYSLER GROUP, LLC
  1. Open hood.
  2. Disconnect and isolate the negative cable from the battery. Wait two minutes for the system capacitor to discharge before further service.
    WARNING:

    Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

  3. Remove the center console. Refer to HOUSING, SHIFTER, REMOVAL .
  4. Remove the ORC mounting nuts (2).
  5. Disconnect the two ORC connectors (4 and 5).
  6. Remove ORC (3) from vehicle.
scientia non olet · About LEMON Manuals