LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Module, Occupant Restraint Controller >> Installation >> Jumper Harness
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Jumper Harness

Fig 1: Removing/Installing ORC Jumper Harness
GC0122056Courtesy of CHRYSLER GROUP, LLC
  1. Connect the ORC jumper harness (2) to the body harness (3).
  2. Connect the ORC jumper harness connector (4) to the ORC (1).
  3. Install the center console. Refer to HOUSING, SHIFTER, INSTALLATION .
  4. Do not reconnect the negative cable to the battery at this time. The Supplemental Restraint System (SRS) Verification Test procedure should be performed following service of any SRS component.

    Refer to SUPPLEMENTAL RESTRAINT SYSTEM VERIFICATION TEST .

scientia non olet · About LEMON Manuals