LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Module, Occupant Restraint Controller >> Installation >> Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module, Occupant Restraint Controller: Installation: Module

Fig 1: Removing/Installing ORC
GC0122055Courtesy of CHRYSLER GROUP, LLC
  1. Connect the two ORC connectors (4 and 5) and ensure that the connectors are engaged.
  2. Position ORC (3) (arrow pointing forward) on the console floor bracket and mounting studs (1).
  3. Install the three ORC retaining nuts (2) and tighten to 9 N.m (79.5 in. lbs.).
  4. Install the center console. Refer to HOUSING, SHIFTER, INSTALLATION .
  5. Do not reconnect the negative cable to the battery at this time. The Supplemental Restraint System (SRS) Verification Test procedure should be performed following service of any SRS component.

    Refer to SUPPLEMENTAL RESTRAINT SYSTEM VERIFICATION TEST .

scientia non olet · About LEMON Manuals