Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER* |
|---|---|---|---|---|
| Rear Driveline Unit (RDU) Bracket to RDU bolt | 60 | 44 | - | - |
| Front RDU Bracket to Isolator Through Bolt/Nut | 90 | 66 | - | - |
| Rear RDU Isolator Through Bolt | 120 | 89 | - | - |
| Rear Propeller Shaft Bolt | 19 | 14 | - | X |
| Pump Motor Bolt | 12 | - | 106 | - |
| Pressure Sensor | 21 | 15 | - | - |
| Hydraulic Fluid Cover Bolt | 6 | - | 53 | - |
| Hub Nut | 175 | 129 | - | X |
| Differential Fill Plug | 35 | 26 | - | - |
| *NEW FASTENER: Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. | ||||
1-SPEED RDM SPECIFICATIONS
| DESCRIPTION | SPECIFICATION |
| GEAR RATIO | 2.73:1 |
| RING GEAR DIAMETER | 165 mm (6.5 in.) |
| DIFFERENTIAL FLUID FILL CAPACITY | 0.89 L (0.94 qt) |
| HYDRAULIC FLUID FILL CAPACITY | 0.439 L (0.46 qt) |