LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2019 >> Pacifica L, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Fuel Pump Control >> Removal And Installation >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the trim from the left rear quarter panel to access Fuel Pump Control Module (FPCM), which is located on the forward part of the left rear wheel housing. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
    GC0170603Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the body wire harness connector (2) from the FPCM.
  4. Remove the fasteners (1) that secure the FPCM to the wheel housing.
  5. Remove the FPCM from the vehicle.
scientia non olet · About LEMON Manuals