LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1998 >> Durango 5.2 Y, Part Time >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Body Control Computer Tests >> Chime Test 2A - Sounds With Driver Door Open
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Chime Test 2A - Sounds With Driver Door Open

NOTE: Perform CHIME TEST 1A  before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION  . For wiring diagrams, refer to WIRING DIAGRAMS  . Perform, after each repair, VERIFICATION TEST VER-1A - VERIFICATION PROCEDURE  .
CAUTION: Always turn ignition switch to OFF position prior to disconnecting any module connector.
  1. Ensure all interior and exterior lights are off. Remove ignition key and open driver's door. If chime does not sound, system is currently functioning correctly. If chime sounds, go to next step.
  2. Using scan tool, read key-in ignition switch status. If scan tool displays KEY-IN IGNITION SW: KEY-IN, go to CHIME TEST 2B. If scan tool does not display KEY-IN IGNITION SW: KEY-IN, replace Central Timer Module (CTM). CTM is located behind right kick panel.
scientia non olet · About LEMON Manuals