Connector Identification
NOTE:
For terminal identification of body control system connectors, use following illustrations. See Fig 1
-12. Connector terminal numbers may be molded into connectors. If connector terminal identification differs from that shown in figure, use wire colors to ensure correct circuit is being tested.
CONNECTOR IDENTIFICATION DIRECTORY
| Connector | See |
|---|---|
| Air Bag Control Module | See Fig 1 |
| Compass Mini-Trip Computer | See Fig 2 |
| Data Link (DLC) | See Fig 3 |
| Door Lock Motor/Ajar Switch (DN Body) | See Fig 4 |
| Instrument Cluster | See Fig 5 |
| Key-In Ignition | See Fig 6 |
| Multifunction Switch | See Fig 7 |
| Relay (Typical) | See Fig 9 |
| Relay Center | See Fig 10 |
| Transmission Control Module Connector | See Fig 11 |
| Wiper Motor | See Fig 12 |