Specifications Index
VIPER SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 190 Ft. Lbs. (257 N.m) | ||
| Battery | N/A | ||
| Brakes | N/A | ||
| Charging | N/A | ||
| Drive Belts | |||
| Adjustment | N/A | ||
| Belt Routing | SERPENTINE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | CYLINDER COMPRESSION TEST | ||
| Oil Pressure | Oil pressure should be 68.9 kPa (10 psi) at idle or 310-517 kPa (45-75 psi) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Drive Plate/Flex Plate Torque | 55 Ft. Lbs. (74 N.m) | ||
| Fuel System | N/A | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plugs | N/A | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Lug Nut Torque | 80-100 Ft. Lbs. (108-136 N.m) | ||