Memory System

WARNING: This page is about a different car, the 2000 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Soft stops are set each time the seat track is physically stalled. This is to prevent motor stalling and damage. This feature can restrict range of travel if stall is caused by obstructions.

The memory selector switch is located on driver side front door. To program memory system for first driver, adjust driver's seat and outside mirrors to desired settings. Press and release memory selector switch "S" button. Press and release memory selector switch No. 1 button. To program memory system for second driver, repeat procedure and select memory selector switch No. 2 button. To recall desired memory position, press and release appropriate memory selector switch button. Driver's seat and mirrors will return to stored position. Press buttons for 1/4-5 seconds. Do not press for more than 10 seconds.

To recall memory positions using Remote Keyless Entry (RKE) transmitters, press UNLOCK button on transmitter. Seat and mirrors will move to stored position. To set stored positions in RKE, see PROGRAMMING MEMORY POSITIONS IN REMOTE KEYLESS ENTRY (RKE) SYSTEM under PROGRAMMING. Memory recall using RKE can be performed anytime ignition is on and vehicle transmission is in Park position. Module will abort RKE memory recall if seat is manually moved or vehicle is shifted from Park position while memory recall is in operation.