LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2000 >> Durango 4.7 N, Part Time >> Repair and Diagnosis >> Body & Frame >> Power Windows >> System Tests >> All Windows Inoperative >> Durango
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All Windows Inoperative: Durango

  1. Check circuit breaker for power window system. See TROUBLE SHOOTING  . Replace circuit breaker as necessary. If circuit breaker is okay, go to next step.
  2. Disconnect negative battery cable. Remove driver's front power window switch. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION.
  3. Check for continuity between ground and terminal No. 5 (Black wire) at driver's power window switch wiring harness connector. If continuity exists, go to next step. If continuity does not exist, repair open in Black wire between driver's power window switch connector and ground. See WIRING DIAGRAMS  .
  4. Reconnect negative battery cable. Turn ignition on. Measure voltage between ground and terminal No. 4 (Tan wire) at driver's power window switch wiring harness connector. If battery voltage is present, check driver's power window switch. See POWER WINDOW SWITCH  under COMPONENT TESTS. If battery voltage is not present, repair open Tan wire between driver power window switch connector and ignition switch. See WIRING DIAGRAMS  . See POWER DISTRIBUTION article in WIRING DIAGRAMS.
scientia non olet · About LEMON Manuals