LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango R/T, 5.9 Z >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Programming >> Sentry Key Immobilizer Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sentry Key Immobilizer Module

CAUTION: If wrong country code is programmed into Sentry Key Immobilizer Module (SKIM) when requested, SKIM must be replaced.
NOTE: If replacing both SKIM and PCM, program PCM first. See POWERTRAIN CONTROL MODULE  . All vehicle keys will need to be replaced and programmed to the new SKIM.
  1. Turn ignition off. Connect DRBIII(R) to DLC. Turn ignition on. Place transmission in Park or Neutral. Using the DRBIII(R), select THEFT ALARM, SKIM, then MISCELLANEOUS. Select PCM REPLACED (GAS ENGINE).
  2. If PCM is being replaced at same time as Sentry Key Immobilizer Module (SKIM), program PCM first. See POWERTRAIN CONTROL MODULE  , then program SKIM followed by replacing all ignition keys and programming them to the new SKIM.
    3. NOTE: If incorrect unique Personal Identification Number (PIN) is entered 3 times, SKIM will be locked for one hour. To unlock SKIM, turn ignition on and allow it to remain on for one hour. Ensure all accessories are turned off. Monitor battery state-of-charge and connect a battery charger if necessary.
  3. Obtain vehicle's unique PIN assigned to SKIM from vehicle owner or manufacturer. Enter secured access mode by entering the vehicle 4-digit PIN. Select COUNTRY CODE and enter correct country. Select YES to update VIN (SKIM will learn VIN from PCM). Press ENTER to transfer secret key data from PCM to SKIM. Program ignition keys to SKIM using DRBIII(R) METHOD  under SENTRY KEYS.
scientia non olet · About LEMON Manuals