LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Vehicle Theft Security >> Sentry Key Remote Entry Module >> Removal >> Sentry Key Remote Entry Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sentry Key Remote Entry Module

  1. Open hood, disconnect and isolate the battery negative cable.
  2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
  3. Remove top cover - cluster (Refer to BODY/INSTRUMENT PANEL/TOP COVER - CLUSTER - REMOVAL) .
  4. Disconnect the one electrical connector to the SKREEM which is the transponder ring connector. See Fig 1.
    Fig 1: Sentry Key Remote Entry Module (SKREEM) - Remove/Install
    GC0037625Courtesy of DAIMLERCHRYSLER CORP.
    1 - SENTRY KEY REMOTE ENTRY MODULE (SKREEM)
    2 - INSTRUMENT CLUSTER (REAR)
    3 - INSTRUMENT PANEL
  5. Pull SKREEM straight out of rear of instrument cluster and remove from vehicle. See Fig 1.
scientia non olet · About LEMON Manuals