LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Central Timer Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Central Timer Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Slide the driver seat to the full forward position.
  3. Disconnect the wire harness connector for the seat belt latch. See Fig 1.
  4. Remove the screws that secure the closeout panel beneath the driver seat cushion and remove the panel.
  5. Remove the screws that secure the Central Timer Module (CTM) to the bracket.
  6. Disconnect the wire harness connectors from the CTM.
  7. Remove the CTM from the vehicle.
Fig 1: Central Timer Module
GC0037478Courtesy of DAIMLERCHRYSLER CORP.
1 - DRIVER SEAT
2 - WIRE HARNESS CONNECTOR
3 - SCREW (2)
4 - CLOSEOUT PANEL
5 - CENTRAL TIMER MODULE
6 - WIRE HARNESS CONNECTOR (2)
7 - SCREW (2)
scientia non olet · About LEMON Manuals