LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> Sprinter 2500, Van Cargo >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Vehicle Theft Security >> Sentry Key Remote Entry Module >> Removal >> Sentry Key Remote Entry Module Transponder Ring
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sentry Key Remote Entry Module Transponder Ring

  1. Open hood, disconnect and isolate the battery negative cable.
  2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
  3. Remove the steering column shrouds.
  4. Unsnap the SKREEM transponder from the ignition cylinder. See Fig 1.
    Fig 1: Transponder Ring
    GC0037624Courtesy of DAIMLERCHRYSLER CORP.
    1 - TRANSPONDER RING
    2 - STEERING COLUMN
  5. Remove top cover - cluster (Refer to BODY/INSTRUMENT PANEL/TOP COVER - CLUSTER - REMOVAL) .
  6. Disconnect the transponder electrical connector from the SKREEM. See Figure.
  7. Maneuver wiring from instrument panel and remove transponder from vehicle.
scientia non olet · About LEMON Manuals