LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Windstar Base, 3.8 4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 3.8L >> Fuel System >> CMP Synchronizer >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CMP Synchronizer: Removal

  1. Position crankshaft to TDC of cylinder No. 1 compression stroke. Note position of electrical connector on CMP sensor.
  2. Place match marks on synchronizer housing and engine. See Figure. Disconnect negative battery cable. Unplug harness connector from CMP sensor. Remove CMP sensor screws and CMP sensor from positioner. Remove synchronizer hold-down bolt and CMP synchronizer.
CAUTION: DO NOT rotate crankshaft while synchronizer is removed from engine.
scientia non olet · About LEMON Manuals