Engine Controls - Pinpoint Test HY: Generator/Regulator System Through Pinpoint Test KD: Electric Exhaust Gas RECIRCULATION (EEGR) System - (Except Diesel & Hybrid)

• Pinpoint Test HY: Generator/Regulator System
  • Notes
  • Introduction
  • Test Procedure
• Pinpoint Test JB: Secondary Ignition (Cop)
  • Introduction
  • Test Procedure
• Pinpoint Test JC: Secondary Ignition (Coil Pack)
  • Notes
  • Introduction
  • Test Procedure
• Pinpoint Test JD: Crankshaft Position (CKP) Sensor
  • Notes
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test JE: Integrated Ignition Coil Pack A, B, Or C Failure
  • Notes
  • Introduction
    • Notes
    • Pinpoint Test Schematics and Connectors
  • Test Procedure
• Pinpoint Test JF: Integrated Ignition Coil On Plug Coil A Through J Failure
  • Notes
  • Introduction
  • Test Procedure
• Pinpoint Test JH: Tachometer Signal Output (CTO)
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test KA: Fuel Pump (FP) Relay
  • Notes
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test Kb: Fuel Pump Driver Module
  • Notes
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure
• Pinpoint Test KD: Electric Exhaust Gas RECIRCULATION (EEGR) System
  • Notes
  • Introduction
    • Notes
    • Powertrain Control Module (PCM) Connector
  • Test Procedure