LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Edge Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1420 (Engine Controls - Pinpoint Tests- 6.0L Diesel Models) >> Pinpoint Test Ar: Random Misfire Detected Introduction >> Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Procedure

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. AR1 PRELIMINARY DIAGNOSIS FOR DTC P0300 
    • Retrieve and record all DTCs.
    • Record the freeze frame data.
    • Clear all DTCs.
    • Carry out the continuous self-test.

    Are any DTCs present? 

    Yes No
    For DTC P0300, GO to  AR2.
    For all others, REFER to DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND DESCRIPTIONS .
    The misfire is intermittent and is currently not active. REFER to NO DTCS PRESENT SYMPTOM CHART INDEX , if a driveability concern exists.
  2. AR2 DIAGNOSTIC TROUBLE CODE (DTC) P0300 
    • Carry out a visual inspection. Check for loose connections, and damaged or corroded pins. Wiggle the harness, attempting to recreate the concern.

    Are any wiring or terminal concerns present? 

    Yes No
    REPAIR as necessary. CLEAR the DTCs.
    CARRY OUT the OBD drive cycle. REFER to DRIVE CYCLES .
    REFER to PERFORMANCE DIAGNOSTIC PROCEDURES .
    CLEAR the DTCs. REPEAT the self-test.