| P0219:00 |
Engine Overspeed Condition: No Sub Type Information |
GO to Pinpoint Test Q |
| P0297:00 |
Vehicle Overspeed Condition: No Sub Type Information |
GO to Pinpoint Test Q |
| P0604:00 |
Internal Control Module Random Access Memory (RAM) Error: No Sub Type Information |
GO to Pinpoint Test L |
| P0605:00 |
Internal Control Module Read Only Memory (ROM) Error: No Sub Type Information |
GO to Pinpoint Test L |
| P0607:00 |
Control Module Performance: No Sub Type Information |
GO to Pinpoint Test L |
| P062F:00 |
Internal Control Module EEPROM Error: No Sub Type Information |
GO to Pinpoint Test L |
| P0630:00 |
VIN Not Programmed or Incompatible - ECM/PCM: No Sub Type Information |
GO to Pinpoint Test L |
| P064F:00 |
Unauthorized Software/Calibration Detected: No Sub Type Information |
GO to Pinpoint Test L |
| P0685:00 |
ECM/PCM Power Relay Control Circuit/Open: No Sub Type Information |
GO to Pinpoint Test N |
| P068A:00 |
ECM/PCM Power Relay De-Energized - Too Early: No Sub Type Information |
GO to Pinpoint Test N |
| P06A6:00 |
Sensor Reference Voltage "A" Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test O |
| P06A7:00 |
Sensor Reference Voltage "B" Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test O |
| P06A8:00 |
Sensor Reference Voltage "C" Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test O |
| P06B8:00 |
Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information |
GO to Pinpoint Test N |
| P1001:00 |
KOER Not Able to Complete, KOER Aborted: No Sub Type Information |
GO to Pinpoint Test J |
| P160A:00 |
Control Module Vehicle Options Reconfiguration Error: No Sub Type Information |
GO to Pinpoint Test L |
| P166A:00 |
Restraints Deployment Communication Circuit: No Sub Type Information |
GO to Pinpoint Test K |
| P2610:00 |
ECM/PCM Engine Off Timer Performance: No Sub Type Information |
GO to Pinpoint Test P |
| U0121:00 |
Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information |
GO to Pinpoint Test A |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test C |
| U0151:00 |
Lost Communication With Restraints Control Module: No Sub Type Information |
GO to Pinpoint Test D |
| U0164:00 |
Lost Communication With HVAC Control Module: No Sub Type Information |
GO to Pinpoint Test E |
| U0212:00 |
Lost Communication With Steering Column Control Module: No Sub Type Information |
GO to Pinpoint Test B |
| U023A:00 |
Lost Communication With Image Processing Module A: No Sub Type Information |
GO to Pinpoint Test F |
| U0252:00 |
Lost Communication With Lighting Control Module- Rear "B": No Sub Type Information |
GO to Pinpoint Test G |
| U0256:00 |
Lost Communication With Front Controls Interface Module "A": No Sub Type Information |
GO to Pinpoint Test H |
| U0415:00 |
Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information |
GO to Pinpoint Test I |
| U0422:00 |
Invalid Data Received From Body Control Module: No Sub Type Information |
GO to Pinpoint Test I |
| U1012:00 |
Invalid Internal Control Module Monitoring Data Received from Anti-Lock Brake System (ABS) Control Module: No Sub Type Information |
GO to Pinpoint Test I |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
GO to Pinpoint Test L |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
GO to Pinpoint Test L |
| U2200:00 |
Control Module Configuration Memory Corrupt: No Sub Type Information |
GO to Pinpoint Test L |