Pinpoint Test C: DTC (Diagnostic Trouble Code) B10D7:05
WARNING: This page is about a different car, the 2022 Ford Transit-350 HD, 2022 Ford Transit-350, 2022 Ford Transit-250, 2022 Ford Transit-150, and 2022 Ford E-Transit. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10D7:05 PATS Key: System Programming Failures Sets when a failure occurs during the key programming procedure. Possible Sources
- Keys not programmed
- Passive key
- C1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present '
Yes DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. Refer to Diagnostic Trouble Code (DTC) Chart . No GO to C2 - C2 PROGRAM SUSPECT PASSIVE KEY
- Program the suspect passive key again. REFER to: Anti-Theft Key Programming - Scan Tool or Key Programming Using Two Programmed Keys . .
Is the passive key programmed successfully?
Yes The system is operating correctly at this time. The passive key was not programmed correctly. No If key programming fails, REPLACE the suspect passive key. PROGRAM the new passive key. REFER to: Anti-Theft Key Programming - Scan Tool or Key Programming Using Two Programmed Keys . .