LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1985 >> Civic DX, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - HONDA PGM-FI >> Testing >> Crank Angle Sensor >> CYL Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CYL Sensor

  1. Release connector from CYL sensor. Measure resistance between White terminal and Red terminal at sensor. Specified resistance should read 0.65-0.85 k/ohms.
  2. Measure insulation resistance between White/Red terminal of sensor and crank angle sensor housing. Resistance should read 100 k/ohms or more.
Fig 1: Testing CYL and TDC Sensors
G35494
scientia non olet · About LEMON Manuals