Passenger's Window Switch Test

Remove power window master switch. See MASTER POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Fig 1 . See PASSENGER'S POWER WINDOW SWITCH TEST table.

Fig 1: Identifying Passenger's Power Window Switch Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

PASSENGER'S POWER WINDOW SWITCH TEST

Position

⁽¹⁾ Pin Continuity

Off

2 & 2; 4 & 5

1 & 4

Down

1 & 3

⁽¹⁾	For terminal identification, See Fig 1 .