CMP Sensor Replacement

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The CMP sensor is on the exhaust side of the cylinder head.

Disconnect the CMP sensor 3P connector (A).

Fig 1: CMP Sensor 3P Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the CMP sensor (B) from the exhaust camshaft side of the cylinder head.
Install the parts in the reverse order of removal with a new O-ring (C).