DTC P0602: ECM Programming Error
WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- This DTC is indicated when the ECM update is not completed.
- Do not turn the ignition switch to ACC (I) or to LOCK (0) while updating the ECM. If you do, the ECM can be damaged.
- Do the ECM update procedure (see ECM UPDATE ).
- Check for Temporary DTCs or DTCs with the HDS.
Is DTC P0602 indicated?
YES -Replace the original ECM (see ECM REPLACEMENT ).
NO -The update is complete. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.