Knock Sensor Replacement

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
Disconnect the knock sensor 1P connector (A).

Fig 1: Lnock Sensor 1P Connector With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the knock sensor (B).
Install the parts in the reverse order of removal.