Ignition Timing

IGNITION TIMING (DEGREES BTDC - RED MARK @ RPM)

Application

Specification

Ignition Timing ⁽¹⁾

⁽²⁾ 6-10 @ 650-750 RPM

⁽¹⁾	Check in no-load condition (headlights, blower motor, rear defogger, A/C and cooling fan off) with M/T in neutral or A/T in Neutral or Park.

⁽²⁾	With scan tool connected to 16-pin Data Link Connector (DLC).

To identify ignition timing mark, see Fig 1.

Fig 1: Locating Ignition Timing Marks (Civic Si & CR-V)

Courtesy of AMERICAN HONDA MOTOR CO., INC.