Park Pin Switch Test
- Remove the shift lever assembly (see SHIFT LEVER REMOVAL
).
- Disconnect the D3 switch/shift lock solenoid/park pin switch connector.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Move the shift lever into P, then check for continuity between D3 switch/shift lock solenoid/park pin switch connector terminals No. 1 and No. 2. There should be no continuity.
- Move the shift lever out of P, and check for continuity between terminals No. 1 and No. 2. There should be continuity.
- If the park pin switch is faulty, replace it (see PARK PIN SWITCH REPLACEMENT
).
- Install the shift lever assembly (see SHIFT LEVER INSTALLATION
).