LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2009 >> Element SC, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit-Receiver Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer Control Unit-Receiver Replacement

  1. Remove the dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
  2. Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  3. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
    Fig 1: Identifying Immobilizer Control Unit-Receiver 7P Connector & Ignition Key Cylinder
    G05451530Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).
  5. Install the immobilizer control unit-receiver in the reverse order of removal.
  6. After replacement, register the unit with the HDS (see IMMOBILIZER CONTROL UNIT-RECEIVER REGISTRATION  ), then check the immobilizer system.