| Cruise control cannot be set |
|
- Open circuit, loose or disconnected terminals: BLU, LT BLU, LT GRN, or YEL wire between the cruise control combination switch and the gauge control module
- Faulty gauge control module
|
| Cruise control can be set, but the cruise main indicator does not come on |
|
Faulty gauge control module |
| Cruise control can be set, but the cruise control indicator does not come on |
|
Faulty gauge control module |
| Vehicle does not accelerate accordingly when the res/+ button is pressed |
|
|
| Set speed does not cancel when the brake pedal is pressed |
|
Faulty brake pedal position switch |
| Set speed does not cancel when the cruise control main button is pressed |
|
|
| Set speed does not cancel when the cancel button is pressed |
|
|
| Set speed does not resume when the res/+ button is pressed (with the cruise control main button pressed on, and set speed temporarily canceled by pressing the brake pedal) |
|
|
| Light switch turned on, the cruise control combination switch illumination does not come on |
|
Open circuit, loose or disconnected terminals: GRY or RED wires between the under-dash fuse/relay box and the gauge control module |