DTC P0602-00: Electric Servo Brake Control Unit Programming Error (2014-15)

DTCs (ESB)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   - 2. Clear the DTCs with the HDS.

   - 3. Turn the vehicle to the OFF (LOCK) mode, and then back to the ON mode.

   - 4. Check for DTCs with the HDS.

   DTC Description	DTC
   P0602-00 Electric Servo Brake Control Unit Programming Error

   Is DTC P0602-00 indicated?

   YES 

   The failure is duplicated. Go to step 2.

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting - Refer to: How to Troubleshoot the Electric Servo Brake System (2014-15) .

2. Electric servo brake control unit check (update)

   -1. Update the electric servo brake control unit if it does not have the latest software.

   - 2. Clear the DTCs with the HDS.

   - 3. Turn the vehicle to the OFF (LOCK) mode, and then back to the ON mode.

   - 4. Check for DTCs with the HDS.

   DTC Description	DTC
   P0602-00 Electric Servo Brake Control Unit Programming Error

   Is DTC P0602-00 indicated?

   YES 

   Replace the electric servo brake control unit - Refer to: Electric Servo Brake Control Unit Removal and Installation (2014-15) .

   NO 

   The system is OK at this time.