DTC P1D01: All CAN Malfunction (Battery Condition Monitor Module - Traction Motor Control Module) (195) (2017)

NOTE:  Before you troubleshoot, review the general troubleshooting information - Refer to: How to Troubleshoot the Electric Powertrain (2017) .

DTCs (HEV)

1. Problem verification

   - 1. Turn the vehicle to the ON mode.

   - 2. Clear the DTC with the HDS.

   - 3. Turn the vehicle to the OFF (LOCK) mode.

   - 4. Turn the vehicle to the ON mode.

   - 5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P1D01 All CAN Malfunction (Battery Condition Monitor Module - Traction Motor Control Module)

   Is DTC P1D01 indicated?

   YES 

   Go to DTC troubleshooting for DTC U0029 (108) , DTC U0038 (99) , DTC U0110 (101) , and/or DTC U1205 (83) .

   NO 

   Intermittent failure. The system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.