DTC 1101: Media Bus Send Error (With Display Audio) (2017)
- First, check the Vehicle 12 volt battery condition .
- This audio DTC sets when there is an internal error in BUS sending.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information - Refer to: How to Troubleshoot the Audio System (With Display Audio) (2017) .
- Problem verification
-1. Clear the hard error codes.
- 2. Turn the vehicle to the OFF (LOCK) mode then the ON mode, and wait at least 1 minute.
- 3. Check for hard error codes.
Is DTC 1101 indicated?
YES
Replace the audio unit - Refer to: Audio Unit Removal and Installation (With Display Audio) (2017) .
NO
Intermittent failure, the system is OK at this time.