DTC 1403: Audio Error 3
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Check the vehicle battery condition first .
- This navigation DTC sets when a mechanical malfunction in the multi-information display unit is detected.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information - Refer to: How to Troubleshoot the Navigation System, or How to Troubleshoot the Navigation System (Display Audio) (2016-17) .
- Check any official Honda service website for more service information about the navigation system.
- Problem verification
-1. Check that the temperature is below 158 F (70 C) in the dash.
- 2. Clear the hard error codes.
- 3. Press the engine start/stop button to select the OFF mode and then select the ON mode.
- 4. Check for hard error codes.
Is DTC 1403 indicated?
YES
Replace the multi-information display unit .
NO
Intermittent failure, the system is OK at this time.