DTC 2702: GPS Diag: Receiver in Navi ECU
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Check the vehicle battery condition first .
- This navigation DTC sets when a problem is detected in the internal GPS receiver (the GPS Receiver is NG in the GPS diagnosis).
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information - Refer to: How to Troubleshoot the Navigation System, or How to Troubleshoot the Navigation System (Display Audio) (2016-17) .
- Problem verification
-1. Clear the hard error codes.
- 2. Press the engine start/stop button to select the OFF mode and then select the ON mode.
- 3. Check for hard error codes.
Is DTC 2702 indicated?
YES
Replace the audio-navigation unit - Refer to: Audio-Navigation Unit Removal and Installation, or Audio-Navigation Unit Removal and Installation (Display Audio) (2016-17) .
NO
Intermittent failure, the system is OK at this time.