With ACC: TPMS Calibration Does Not Complete (Indicated FAILED In The MID) (TPMS)

Diagnostic procedure

1. Check for VSA system DTCs .
2. Check for the VSA indicator. If VSA indicator turns on, do the VSA system symptom troubleshooting "ABS indicator, brake system indicator, and VSA indicator do not go off" - Refer to: VSA System Symptom Troubleshooting - ABS indicator, brake system indicator, and VSA indicator do not go off, or VSA System Symptom Troubleshooting - VSA cannot be turned OFF, or VSA System Symptom Troubleshooting - ABS indicator, brake system indicator, and VSA indicator do not go off (With ACC) (2016-17) .
3. Do the gauge control module self-diagnostic function - Refer to: Gauges Self-Diagnostic Function (2013-15), or Gauges Self-Diagnostic Function (2016-17) .
4. Update the VSA modulator-control unit if it does not have the latest software . If the VSA modulator-control unit was updated and the symptom is still present, replace the VSA modulator-control unit - Refer to: VSA Modulator-Control Unit Removal and Installation, or VSA Modulator-Control Unit Removal and Installation (With ACC) (2016-17) .