LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Accord Plug-In >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures (4-CYL) >> Common Specs & Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Common Specs & Procedures

ACCORD COMMON SPECS & PROCEDURES INDEX

System Specification/Procedure
Air Conditioning
Service See AIR CONDITIONING 2013 , AIR CONDITIONING (2014) , AIR CONDITIONING (2015) , or AIR CONDITIONING (2016-17)
Torque See applicable component in Heating, Ventilation, and Air Conditioning (2013-15) , or Heating, Ventilation, and Air Conditioning 2016-17 .
Axle Nut/Hub Nut
Front 329 N.m (242 ft. lbs.)
Rear 98 N.m (72 ft. lbs.)
Battery Battery Test
Brakes
Bleeding Sequence Conventional Brake System Bleeding
Disc Brakes BRAKES 2013 , BRAKES (2014) , BRAKES (2015) , BRAKES (2016-17) , Front Brake Disc Removal and Installation , or Rear Brake Disc Removal and Installation
Torque See applicable component in Brakes (2013-15) , or Brakes (2016-17) .
Charging
Generator Engine Electrical (K24W1) (2013) , Engine Electrical (2.4L) (2014) , Engine Electrical (2.4 L) (2015) , or Engine Electrical (2.4 L) (2016-17) .
Torque See Engine Electrical (K24W1) , or Engine Electrical (K24W1) .
Drive Belts
Adjustment Drive Belt Inspection (L4)
Belt Routing Drive Belt Removal and Installation (L4)
Engine Cooling
General Service Specifications COOLING SYSTEM (K24W1) (2013) , COOLING SYSTEM (2.4L) (2014) , COOLING SYSTEM (2.4 L) (2015) , or COOLING SYSTEM (2.4 L) (2016-17)
Radiator Cap Pressure 93-123 kPa (0.95-1.25 kgf/cm2 , 14-18 psi)
Thermostat R & I Thermostat Removal, Installation, And Test (L4) (2013-15) , or Thermostat Removal, Installation, And Test (L4) (2016-17) .
Water Pump R & I Water Pump Removal And Installation (L4)
Engine Mechanical
Compression ENGINE ASSEMBLY (2013) , ENGINE ASSEMBLY (2014) , ENGINE ASSEMBLY (2015) , or ENGINE ASSEMBLY (2016-17) .
Oil Pressure (176°F (80°C) 70 kPa (.7 kgf/cm2 , 10 psi) @ idle; 300 kPa (3.1 kgf/cm2 , 44 psi) @ 3000 RPM
Overhaul See applicable specifications table in STANDARDS AND SERVICE LIMITS (KA/KC) (2013) , STANDARDS AND SERVICE LIMITS (KA/KC) (2014) , STANDARDS AND SERVICE LIMITS (KA/KC) (2015) , or STANDARDS AND SERVICE LIMITS (KA/KC) (2016-17) .
Torque See applicable component in one of the following articles:
Torque Specifications (2013-15) , or Torque Specifications (2016-17)
Fluid Specifications See FLUIDS under MAINTENANCE tab.
Flex Plate Torque (A/T, CVT) 74 N.m (54 ft. lbs.)
Flywheel Torque (M/T) 123 N.m (90 ft. lbs.)
Fuel System
Pressure Specification 390-440 kPa (4.0-4.5 kgf/cm2 , 57-64 psi)
Fuel Pressure Test Procedure Fuel Pressure Test (L4)
Fuel Filter Location Fuel Tank Unit Removal And Installation
Ignition
Firing Order & Cylinder Identification Firing Order & Cylinder Identification
Spark Plug (NGK: DILKAR7G11GS); DENSO: DXE22HQR-D11S)
Gap 1.0-1.1 mm (.039-.043 in.)
Torque 18 N.m (13 ft. lbs.)
Starting
Starter STARTER REMOVAL, INSTALLATION, AND PERFORMANCE TEST (L4)
Torque See Engine Electrical (K24W1) (2013-15) , or Engine Electrical (K24W1) (2016-17) .
Wheel Alignment
Adjustment Specifications SUSPENSION (2013) , SUSPENSION (2014) , SUSPENSION (2015) , or SUSPENSION (2016-17) .
Torque
Front See applicable component in Suspension (2013-15) , or Suspension (2016-17) .
Rear See applicable component in Suspension (2013-15) , or Suspension (2016-17) .
Wheel & Tire
Wheel Lug Nut Torque 108 N.m (80 ft. lbs.)