LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> CR-V EX, 2.4L Eng, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Real Time 4WD System Troubleshooting & Testing >> Real Time AWD Control Unit Initialization >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Real Time AWD Control Unit Initialization: Procedure

NOTE:
  • Whenever the real time AWD control unit is replaced, it must be initialized.
  • Park the vehicle on a flat and level surface.
  1. HDS DLC - Connection
    1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
    2. Turn the ignition switch to ON (II).
    3. Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.
      Fig 1: Identifying Data Link Connector
      G08888250Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Real Time AWD Control Unit Initialization
    1. Select the ADJUSTMENT in the REAL TIME AWD SYSTEM with the HDS.
    2. Select the ECU REPLACEMENT in the ADJUSTMENT with the HDS.
      NOTE: See the HDS Help menu for specific instructions.
scientia non olet · About LEMON Manuals