LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Module Communications Network (Hybrid)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test K : The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test K : The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2015 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Power Distribution/SJB for schematic and connector information.

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The BCM communicates with the diagnostic scan tool through the HS-CAN1.

Possible Causes 

Visual Inspection and Diagnostic Pre-checks 

Verify High Current BJB MEGA fuses 2 (125A) and 3 (125A), and BJB fuses 62 (50A) and 67 (50A) are OK.

scientia non olet · About LEMON Manuals