LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Module Communications Network (Hybrid)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test S : The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test S : The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2015 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Power Distribution/SJB for schematic and connector information.

Refer to Audio System/Navigation - Without Touchscreen for schematic and connector information.

Normal Operation and Fault Conditions 

The DSP communicates on the HS-CAN3. Diagnostic messages are sent/received between the DLC and the diagnostic scan tool through the HS-CAN2 circuits at the DLC, and are translated through the GWM to the HS-CAN3.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 5 (20A) and 28 (20A) are OK.

scientia non olet · About LEMON Manuals